SMO / AVS OFFSET MOWER
SMO avs is a very strong offsetting mower. It mulches grass and brush up to 7 cm (2.8“) in diameter. Hydraulic angling and hydraulic side shift make it possible to work in many different positions and situations. It is thus suitable for the maintenance of greenspace such as slopes, road sides, or of steep orchards and vineyards. As on all the SEPPI flail mowers, it is possible to adjust the height of cut and the degree of mulching.
The offsetting mulcher SMO avs can be hydraulically angled from +90° to -50°, indepentently from the side shift. Maximum side shift is 180 cm (71“). With maximum side shift the mulcher can reach up to 355 cm (132“) to the right of the tractor center line, depending on the working width.
SMO/AVS150 2 3/4" 59" 55 1496
SMO/AVS175 2 3/4" 69" 55 1650
SMO/AVS200 2 3/4" 79" 60 1760
SMO/AVS225 2 3/4" 88" 60 1914
Standard
- mulches grass and bushes up to 7 cm [2.8”] Ø
- working speed 1–5 km/h
- cat. 2 ISO 3-point linkage
- hyd. positioning from +90° to -50°
- hyd. side shift to the right
- 540 rpm gearbox with cross shaft
- input shaft 1 3/8” Z=6
- number belts up to L=200: 4 from L=225: 5
- adjustable rear hood
- front protection: metal flaps (OPT 181) or chains (OPT 025)
- rear protection: rubber flap
- support roller adjustable in height 5 cm [2”]
- anti-shock device
- necessary hyd. fittings: 2 double acting
- standard flails up to L=200: SMO from L=225: SMW
- PTO shaft with freewheel
- rotor with 3 Y knives
- lateral support rollers 160 mm (6")
- additional rubber front protection
- chevrons for working and for transportation on public roads